4.6 / 5
(68)
For resellers

LED Dimmer 9003 | Push Button | 230VAC - 500VA / 2.1A

Complete set: dimmer, push button, inner frame and cover frame

€ 72,49 € 32,95

€ 27,23 excluding VAT

Digital LED touch dimmer 500 watt WIIS® for dimming LED lighting, complete with matching cover frame in signal white gloss.

This push-button touch dimmer for LED lighting can be easily replaced over time by another WIIS® control form with the latest protocol.

Caution! Depending on the type of LED lighting, when using many small lights/spotlights of 3W -5W, a few may continue to glow at the off position. In that case, mount a dimmer stabilizer parallel to the fixture (e.g. chandelier) or choose a dimmer with lower power (250W/VA) if possible.

Advantages:

  • Future-proof, through ability to grow with the evolution of wireless technologies without modifications to cabling or installation.
  • Control form also adjustable from pressure dimming to touch-free switching, for example, and from Bluetooth to Matter.

Here's how it works:

  1. Mounting: Mount the base element in the wall and the button module simply clicks on later.
  2. On the dimmer set minimum and maximum light value.

Characteristics:

  • 2-wire digital touch dimmer.
  • Modular, low installation depth of 22 mm.
  • Modern and sleek design: matching any interior.

In this webshop, you can select a different color or finish with the cover frames of many other System 55 manufacturers if you wish.

Delivery time 1-2 days
Free shipping from €75 excluding VAT
Via PostNL Track & Trace
Professional advice

Install Easily Within 10 Minutes

Installing your new light switch is done as follows. Questions? Get in touch.

1. Turn off your power & check the voltage
Turn off your power through the meter box by flipping the fuse. After removing your switch, always check with a voltmeter to make sure there is no voltage left on the wires.
2. Remove your current switch
Using a screwdriver, carefully remove your current switch.
3. Install the dimmer, knob & windows
Easily install the dimmer, knob and windows by following the steps in the manual.
4. Enjoy your new light dimmer
Enjoy the convenience, comfort, and/or safety of your new light dimmer.
Questions about the product or installation? Get in touch!
Do you have more questions about the product or its installation?

Then contact us for free. We are happy to think with you to help you further.
Contact Us
Technical data
Manual
Article code 7360001313
EAN code 8715422115851
Model BEDIM-500S BM-BASIC_1 9003
Color Signal white gloss
Tension 230VAC-500VA/2.1A
Load at 25 °C Incandescent lamps - 1 ... 500 W | HV halogen lamps - 1 ... 500 W | Electronic transformers - 1 ... 500 W/VA | Electronic transformers with LV LED - 1 ... 500 W/VA | HV LED lamps dimmable - 1 ... 500 W/VA | Energy-saving lamps dimmable - 1 ... 200 VA
"For dimmable HV LED lamps and electronic transformers with LV LED, the max. connection power depends on the lamp P(ower) F(actor) At PF ~ 1 this corresponds to 500W, at lower PF 500VA must be adhered to. Non-dimmable LED lamps usually have a PF ~ 0.6 which limits the switchable power to 320W or even lower: Ohms capacitive - 1 ... 500 W/VA | Ohms and HV LED - 1 ... 500 W/VA | Ohms and energy saving lamps - 1 ... 200 W/VA | Capacitive-inductive - Not permitted | Inductive transformers with LV LED - Not permitted | Inductive transformers - Not permitted | Ohms-inductive - Not permitted."