4.6 / 5
(51)
For resellers

Rotary knob | LED controller | Dali | 230VAC-2W | 9010

€ 105,49

€ 87,18 excluding VAT

Sold Out

Complete LED rotary dimmer for dimming lighting using DALI drivers. Included in the set are a controller, a rotary knob, an indoor frame and matching cover frame in pure white gloss. The DALI bus provides 50mA for up to 25 drivers.

This rotary dimmer for LED lighting can eventually be easily replaced by another WIIS® control form with the latest protocol, allowing you to grow future-proof with the evolution of wireless technologies. From rotary dimming to touch-free switching and from Bluetooth to Matter without adjustments to cabling or installation.

Installation of the rotary dimmer is easy. Thanks to the low installation depth of 22 mm, there is always enough space to connect the wiring in the wall box.

In this webshop, you can select a different color or finish with the cover frames of many other System 55 manufacturers if you wish.

Delivery time 3-6 days
Free shipping within NL above 75 euro ex VAT
Shipping by PostNL

Install Easily Within 10 Minutes

Installing your new light switch is done as follows. Questions? Get in touch.

1. Turn off your power & check the voltage
Turn off your power through the meter box by flipping the fuse. After removing your switch, always check with a voltmeter to make sure there is no voltage left on the wires.
2. Remove your current switch
Using a screwdriver, carefully remove your current switch.
3. Install the dimmer, knob & windows
Easily install the dimmer, knob and windows by following the steps in the manual.
4. Enjoy your new light dimmer
Enjoy the convenience, comfort, and/or safety of your new light dimmer.
Questions about the product or installation? Get in touch!
Do you have more questions about the product or its installation?

Then contact us for free. We are happy to think with you to help you further.
Contact Us
Technical data
Manual
Article code 7570002111
EAN code 8715422114311
Model BEDALI-50MA BM-BASIC-KNOB 9010
Color Pure white gloss
Tension 230VAC-2W
Product Features Works together with up to 3 DALI potentiometers connected to the DALI bus | Built-in DALI power supply for up to 25 DALI bus devices | More than 25 connected DALI bus devices through an external DALI bus power supply.
Power consumption: max. 3 W | Ambient temperature - --0 ... +35 °C | Rated voltage DALI - DC 16 V | Output current - max. 50 mA | Short-circuit current - max. 60 mA | Color temperature setting - 2,000 ... 10,000 K | Number of DALI participants - max. 25 | Number of control units in parallel - max. 4