4.6 / 5
(51)
For resellers

Push button | Fading | LED dimmer | 230VAC - 500VA/2.1A | 9010

Customer review 5 / 5
(1)
Complete set: touch dimmer, push button, inside frame and cover frame

€ 76,90 € 34,94

€ 28,88 excluding VAT

The Freelux Fading 500 watt 2-wire touch dimmer offers comfort and safety. Equipped as a light switch, it can easily replace the existing switch. Once mounted, the Fading dimmer operates fully automatically by dimming up and down buttons from 0-100% with memory of the last dimming level selected. As an extra, the light can be gradually extinguished all at once when turning off or with a 15-second lag time to extinguish the light. Ideal for bedrooms, (care) living areas, staircases or home exits. Aconvenience you quickly get used to!

Installation of the fading dimmer is easy. Thanks to the low installation depth of 22 mm, there is always enough space to connect the 2-wire in the wall box.

In this webshop, you can select a different color or finish with the cover frames of many other System 55 manufacturers if you wish.

Delivery time 3-6 days
Free shipping within NL above 75 euro ex VAT
Shipping by PostNL

Install Easily Within 10 Minutes

Installing your new light switch is done as follows. Questions? Get in touch.

1. Turn off your power & check the voltage
Turn off your power through the meter box by flipping the fuse. After removing your switch, always check with a voltmeter to make sure there is no voltage left on the wires.
2. Remove your current switch
Using a screwdriver, carefully remove your current switch.
3. Install the dimmer, knob & windows
Easily install the dimmer, knob and windows by following the steps in the manual.
4. Enjoy your new light dimmer
Enjoy the convenience, comfort, and/or safety of your new light dimmer.
Questions about the product or installation? Get in touch!
Do you have more questions about the product or its installation?

Then contact us for free. We are happy to think with you to help you further.
Contact Us
Technical data
Manual
Article code 7360141111
EAN code 8715422118210
Model BEDIM-500S BM-BASIC_1 FADING 9010
Color Pure white gloss
Tension 230VAC-500VA/2.1A
Load at 25 °C Incandescent lamps - 1 ... 500 W | HV halogen lamps - 1 ... 500 W | Electronic transformers - 1 ... 500 W/VA | Electronic transformers with LV LED - 1 ... 500 W/VA | HV LED lamps dimmable - 1 ... 500 W/VA | Energy-saving lamps dimmable - 1 ... 200 VA
For dimmable HV LED lamps and electronic transformers with LV LED, the max. connection power depends on the lamp P(ower) F(actor) At PF ~ 1 this corresponds to 500W, at lower PF 500VA must be adhered to. Non-dimmable LED lamps usually have a PF ~ 0.6 which limits the switchable power to 320W or even lower: Ohms capacitive - 1 ... 500 W/VA | Ohms and HV LED - 1 ... 500 W/VA | Ohms and energy saving lamps - 1 ... 200 W/VA | Capacitive-inductive - Not permitted | Inductive transformers with LV LED - Not permitted | Inductive transformers - Not permitted | Ohms-inductive - Not permitted