4.6 / 5
(51)
For resellers

Rotary knob | LED dimmer | 230VAC - 500VA/2.1A | 9010

Complete set: dimmer, rotary switch, inner frame and cover frame

€ 65,88 € 29,95

€ 24,75 excluding VAT

Complete LED rotary dimmer with dimming function 500 watts. Included in the set are a dimmer, inner frame, rotary knob and matching cover frame in pure white gloss.

This standard rotary dimmer for LED lighting can eventually be easily replaced by another WIIS® control form with the latest protocol, allowing you to grow future-proof with the evolution of wireless technologies. From rotary dimming to touch-free switching and from Bluetooth to Matter without adjustments to cabling or installation.

Installation of the dimmer is easy. Thanks to the low installation depth of 22 mm, there is always enough space to connect the 2-wire in the wall box.

Caution! Depending on the type of LED lighting, when using many small lights/spotlights of 3W -5W, a few may continue to glow at the off position. In that case, mount a dimmer stabilizer parallel to the fixture (e.g. chandelier) or choose a dimmer with lower power (250W/VA) if possible.

In this webshop, you can select a different color or finish with the cover frames of many other System 55 manufacturers if you wish.

Delivery time 3-6 days
Free shipping within NL above 75 euro ex VAT
Shipping by PostNL

Install Easily Within 10 Minutes

Installing your new light switch is done as follows. Questions? Get in touch.

1. Turn off your power & check the voltage
Turn off your power through the meter box by flipping the fuse. After removing your switch, always check with a voltmeter to make sure there is no voltage left on the wires.
2. Remove your current switch
Using a screwdriver, carefully remove your current switch.
3. Install the dimmer, knob & windows
Easily install the dimmer, knob and windows by following the steps in the manual.
4. Enjoy your new light dimmer
Enjoy the convenience, comfort, and/or safety of your new light dimmer.
Questions about the product or installation? Get in touch!
Do you have more questions about the product or its installation?

Then contact us for free. We are happy to think with you to help you further.
Contact Us
Technical data
Manual
Article code 7360002111
EAN code 8715422116216
Model BEDIM-500S BM-BASIC_KNOB 9010
Color Pure white gloss
Tension 230VAC-500VA/2.1A
Load at 25 °C Incandescent lamps - 1 ... 500 W | HV halogen lamps - 1 ... 500 W | Electronic transformers - 1 ... 500 W/VA | Electronic transformers with LV LED - 1 ... 500 W/VA | HV LED lamps dimmable - 1 ... 500 W/VA | Energy-saving lamps dimmable - 1 ... 200 VA
"For dimmable HV LED lamps and electronic transformers with LVled, the max. connection power depends on the lamp P(ower) F(actor) At PF ~ 1 this corresponds to 500W, at lower PF 500VA must be adhered to. Non-dimmable LED lamps usually have a PF ~ 0.6 which limits the switchable power to 320W or even lower: Ohms capacitive - 1 ... 500 W/VA | Ohms and HV LED - 1 ... 500 W/VA | Ohms and energy saving lamps - 1 ... 200 W/VA | Capacitive-inductive - Not permitted | Inductive transformers with LV LED - Not permitted | Inductive transformers - Not permitted | Ohms-inductive - Not permitted"