4.6 / 5
(68)
For resellers

LED Push Button Switch | 230V / 10A | 9003

Complete set: LED light switch, push button, inner frame and cover frame

€ 54,89 € 24,95

€ 20,62 excluding VAT

Digital push button switch 10A for switching LED lighting, complete with matching cover frame in signal white gloss.

This 2-wire push-button switch for LED interior lighting can be replaced over time without any problem by another WIIS® control form with the latest protocol.

NOTE: The minimum LED lamp power must be 25W/VA, so a total load of 25W on the switch. For lower powers, a 2-pole switch is recommended.

Advantages:

  • Future-proof, through ability to grow with the evolution of wireless technologies without modifications to cabling or installation.
  • Control form also adjustable from pressure switching to touch-free switching, for example, and from Bluetooth to Matter.

Here's how it works:

  1. Mounting: Mount the base element in the wall and the button module simply clicks on later.
  2. Has a load of about 1800 watts.

Characteristics:

  • 2-wire 10A switch.
  • Modular, low installation depth of 22 mm.
  • Modern and sleek design: matching any interior.

In this webshop, you can select a different color or finish with the cover frames of many other System 55 manufacturers if you wish.

Delivery time 1-2 days
Free shipping from €75 excluding VAT
Via PostNL Track & Trace
Professional advice

Install Easily Within 10 Minutes

Installing your new light switch is done as follows. Questions? Get in touch.

1. Turn off your power & check the voltage
Turn off your power through the meter box by flipping the fuse. After removing your switch, always check with a voltmeter to make sure there is no voltage left on the wires.
2. Remove your current switch
Using a screwdriver, carefully remove your current switch.
3. Install the switch, knob & windows
Easily install the switch, knob and windows by following the steps in the manual.
4. Enjoy your new light switch
Enjoy the convenience, comfort, and/or safety of your new light switch.
Questions about the product or installation? Get in touch!
Do you have more questions about the product or its installation?

Then contact us for free. We are happy to think with you to help you further.
Contact Us
Technical data
Manual
Article number 7120001313
EAN code 8715422113659
Model BESWI-10A BM-BASIC_1 9003
Color Signal white gloss
Rated voltage 230VAC/10A
Tax Incandescent lamps - 2300 W | HV halogen lamps -1500 W | Electronic LED drivers - 2000 VA | Inductive transformers - Not permitted | HV LED lamps - 2000 W/VA | Energy-saving lamps - 1000 VA | Fluorescent lamps not compensated - Not permitted
For HV LED lamps and electronic LED drivers with LV LED, the max. connection power depends on the lamp P(ower) F(actor). At PF ~ 1, this corresponds to 2000W; at lower PF, 2000VA must be adhered to.