4.7 / 5
(60)
For resellers

Touch-free operation | LED light switch | 230VAC/10A | 9004

Complete set: LED light switch, touch-free button, inner frame and cover frame

€ 83,49 € 37,95

€ 31,36 excluding VAT

NOTE: The minimum LED lamp power must be 25W/VA, so a total load of 25W on the switch. For lower powers, a 2-pole switch is recommended.

The Freelux 2-wire hygiene switch Hygieia responds to a simple waving motion from 5 inches away for lights on or off. This unique non-contact switch with proximity sensor, for standard recessed wall boxes, eliminates the need for touch, ensuring optimum hygiene. Corona has greatly increased the reluctance to touch switches in public areas because they can spread bacteria and viruses. Applied in laboratories, hospitals, restaurants, food production, nurseries, nursing homes, offices, prisons, et cetera. In the private sphere, this technology also provides additional comfort and convenience in the kitchen, garage or workspace. For switching a large number of non-dimmable LED fixtures.

In this webshop, you can select a different color or finish with the cover frames of many other System 55 manufacturers if you wish.

Delivery time 3-6 days
Free shipping within NL above 75 euro ex VAT
Shipping by PostNL

Install Easily Within 10 Minutes

Installing your new light switch is done as follows. Questions? Get in touch.

1. Turn off your power & check the voltage
Turn off your power through the meter box by flipping the fuse. After removing your switch, always check with a voltmeter to make sure there is no voltage left on the wires.
2. Remove your current switch
Using a screwdriver, carefully remove your current switch.
3. Install the switch, knob & windows
Easily install the switch, knob and windows by following the steps in the manual.
4. Enjoy your new light switch
Enjoy the convenience, comfort, and/or safety of your new light switch.
Questions about the product or installation? Get in touch!
Do you have more questions about the product or its installation?

Then contact us for free. We are happy to think with you to help you further.
Contact Us
Technical data
Manual
Article number 7128303212
EAN code 8715422112119
Model BESWI-10A BM-GESTURE 9004
Color Signal black matte painted
Rated voltage 230VAC/10A
Tax Incandescent lamps - 2300 W | HV halogen lamps -1500 W | Electronic LED drivers - 2000 VA | Inductive transformers - Not permitted | HV LED lamps - 2000 W/VA | Energy-saving lamps - 1000 VA | Fluorescent lamps not compensated - Not permitted
For HV LED lamps and electronic LED drivers with LV LED, the max. connection power depends on the lamp P(ower) F(actor). At PF ~ 1, this corresponds to 2000W; at lower PF, 2000VA must be adhered to.